Very often, buyers of tanks, reservoirs and other containers have the following questions:

• How many liters is 1 cubic meter?
• How many cubic centimeters (cube centimeters), dm cube in a liter?
• How many liters of gas, propane, earth, solution are in a cube?
• How many liters in a cube of concrete, diesel fuel?
• How many liters per cubic meter (cubic meter)?
• How many liters of air are in a cube?

Further, we can single out groups of more clarifying questions, for example, a tank of 50 liters, how many cubes? Or 500, 5000 3000, 200 liters - how many cubic meters are these. These questions are relevant when you need to buy a container for 50, 100, 200 liters - while manufacturers offer containers for 5, 10 15 cubic meters. Let's figure out how to convert cubes to liters and vice versa. Whether such transfers between units of measurement depend on the substance that will be placed in the container.

Converting cubes to liters

First, a small digression into the school physics course. The generally accepted unit for measuring volume, as you know, is the cubic meter. Represents 1 cubic meter. m - the volume of a cube, the side of which is equal to one meter. This unit is not always convenient, therefore, quite often others are used - cube centimeters, and cubic decimeters - liters.

In everyday life, the most convenient unit of measurement is the liter - the volume of a cube, the side of which is 10 cm or 1 dm. Thus, we get the following ratio: 1 liter = 1 dm cube.

From here we get the following forms:

1 cubic meter m = 1000 l (formula for the volume of a cube in liters)

• How many liters are 0.5 cubic meters? Solution: 0.5 * 1000 = 500 liters. Answer: 500 liters.
• How many liters of 10 cubic meters? Solution: 10 * 1000 = 10,000 liters. Answer: 10,000 liters.
• How many liters is 2 cubes? Solution: 2 * 1000 = 2000 liters. The answer is 2,000 liters.
• How many liters is 20 cubic meters? Solution: 20 * 1000 = 20,000 liters. The answer is 20,000 liters.
• How many liters is 30 cubic meters? Answer: 30,000 liters.
• How many liters of 300 cubic meters? Answer: 300,000 liters.
• How many liters is 5 cubic meters? Answer: 5,000 liters.
• 6 cubes - how many liters? Answer: 6,000 liters.
• How many liters are 4 cubes? The answer is 4000 liters.

Accordingly, the simplest: The answer to the question: "How many liters of 1 cubic meter?" - 1000 liters.

How many liters are there in a cubic meter?

And now we will give answers to questions regarding the conversion of liters to cubic meters.

• How many cubes are 100 liters? Solution: 100 * 0.001 = 0.1 cubic meters. meters. Answer: 0.1 cubic meters.
• How many cubes are 200 liters? Solution: 200 * 0.001 = 0.2 cubic meters. meters. Answer: 0.2 cubic meters.
• How many cubes are 3000 liters? The answer is 3 cubic meters. meters.
• How many cubes are 500 liters? Answer: 0.5 cubic meters.
• 5000 liters how many cubes? Answer: 5 cubes.
• How many cubes are 1000 liters? Answer: 1 cubic meter.
• How many cubes are 10000 liters? Answer: 10 cubic meters. m.
• How many cubic meters is 140 liters? Answer: 0.14 cubic meters.
• How many cubes are 1500 liters? Answer: 1.5 cubic meters.

The calculator converts volume units. The most commonly used metric units are liter and cubic meter. A liter is equal to 1 cubic decimeter, a cubic meter is equal to 1,000 liters. A hectoliter is equal to 100 liters.

The Anglo-American system uses historical units, which in the United States and Great Britain, despite the same name, represent different volumes. In America, moreover, a different system of units of volume for liquids and solids (for example, grain) is still used. For example, one pint can represent three different volumes. In the translation table, the individual systems are clearly separated.

Converter

Enter volume and select units

Round up to decimal places

Length and Distance Converter Mass Converter Bulk and Food Volume Converter Area Converter Culinary Recipe Volume and Units Converter Temperature Converter Pressure, Stress, Young's Modulus Converter Energy and Work Converter Power Converter Force Converter Time Converter Linear Velocity Converter Flat Angle Converter Thermal Efficiency and Fuel Efficiency Numeric Conversion Systems Converter of Information Measurement Systems Currency Rates Women's Clothing and Shoes Sizes Men's Clothing and Shoes Sizes Angular Velocity and Rotation Rate Converter Acceleration Converter Angular Acceleration Converter Density Converter Specific Volume Converter Moment of Inertia Converter Moment of Force Converter Torque converter Specific calorific value (mass) converter Energy density and fuel calorific value (volume) converter Differential temperature converter Coefficient converter Thermal expansion coefficient Thermal resistance converter Thermal conductivity converter Specific heat capacity converter Thermal exposure and radiation power converter Heat flux density converter Heat transfer coefficient converter Volumetric flow rate converter Mass flow rate Molar flow rate converter Mass flux density converter Molar concentration converter Mass concentration in solution converter absolute) viscosity Kinematic viscosity converter Surface tension converter Vapor permeability converter Water vapor flux density converter Sound level converter Microphone sensitivity converter Sound pressure level (SPL) converter Sound pressure level converter with selectable reference pressure Luminance converter Luminous intensity converter Illumination converter Computer graphics resolution converter Frequency and Wavelength Converter Optical Power in Diopters and Focal distance Diopter power and lens magnification (×) Electric charge converter Linear charge density converter Surface charge density converter Bulk charge density converter Electric current linear current density converter Surface current density converter Electric field strength converter Electrostatic potential and voltage converter Electrostatic potential and voltage converter Electrical resistance converter Converter electrical resistivity Electrical conductivity converter Electrical conductivity converter Electrical capacitance Inductance converter American wire gauge converter Levels in dBm (dBm or dBmW), dBV (dBV), watts, etc. units Magnetomotive force converter Magnetic field strength converter Magnetic flux converter Magnetic induction converter Radiation. Ionizing Radiation Absorbed Dose Rate Converter Radioactivity. Radioactive decay Radiation converter. Exposure Dose Converter Radiation. Absorbed Dose Converter Decimal Prefix Converter Data Transfer Typography and Image Processing Unit Converter Timber Volume Unit Converter Calculating Molar Mass Periodic Table of Chemical Elements D. I. Mendeleev

1 liter [l] = 1000 cc [cm³]

Initial value

Converted value

cubic meter cubic kilometer cubic decimeter cubic centimeter cubic millimeter liter exaliter petaliter teraliter gigaliter megalithic liter kiloliter hectoliter decaliter deciliter centiliter milliliter microliter nanoliter nanoliter picoliter femtoliter attoliter cc droplet US barrel British barrel American gallin british glass american glass (metric) glass british ounce fluid USA ounce fluid british tablespoon amer. tablespoon (meter) tablespoon Brit. dessert spoon amer. dessert spoon brit. teaspoon of Amer. teaspoon metric teaspoon brit. jill, gill american jill, gill british minim american minim british cubic mile cubic yard cubic foot cubic inch register tonne 100 cubic feet 100 cubic feet acre-feet acre-feet (US, geodetic) acre-inch decaster decister cord tan hogshead board foot drachma kor (biblical unit) homer (biblical unit) baht (biblical unit) gyn (biblical unit) kab (biblical unit) log (biblical unit) glass (spanish) volume of the earth Planck volume cubic astronomical unit cubic parsec cubic kiloparsec cubic kiloparsec gigaparsec cask bucket damask quarter wine bottle vodka bottle glass cup scale

Wavelength and frequency

Learn more about volume and units in recipes

General information

Volume is the space occupied by a substance or object. Also, the volume can refer to the free space inside the container. Volume is a three-dimensional quantity, as opposed to, for example, length, which is two-dimensional. Therefore, the volume of flat or two-dimensional objects is zero.

Volume units

Cubic meter

The SI unit of volume is cubic meter. The standard definition of one cubic meter is the volume of a cube with edges one meter long. Derived units such as cubic centimeters are also widely used.

Liter

The liter is one of the most commonly used units in the metric system. It is equal to the volume of a cube with edges 10 cm long:
1 liter = 10 cm × 10 cm × 10 cm = 1000 cubic centimeters

It's like 0.001 cubic meters. The mass of one liter of water at a temperature of 4 ° C is approximately equal to one kilogram. Milliliters, which are equal to one cubic centimeter or 1/1000 liter, are also often used. A milliliter is usually referred to as ml.

Jill

Gills are units of volume used in the United States to measure alcoholic beverages. One jill is five fluid ounces in the British imperial system, or four in the American system. One American jill is equal to a quarter pint or half a cup. Irish pubs serve hot drinks in quarter-gill portions, or 35.5 milliliters. Scotch servings are smaller - one-fifth of a gill, or 28.4 milliliters. In England, until recently, portions were even smaller, only one-sixth of a gill, or 23.7 milliliters. Now, this is 25 or 35 milliliters, depending on the rules of the institution. The hosts can decide for themselves which of the two portions to serve them.

Dram

Dram, or drachma, is a measure of volume, mass, and also a coin. In the past, this measure was used in the pharmaceutical industry and was equal to one teaspoon. Later, the standard volume of a teaspoon changed, and one spoon became equal to 1 and 1/3 drachma.

Volumes in cooking

Liquids in cooking recipes are usually measured by volume. Loose and dry products in the metric system, on the contrary, are measured by weight.

Tea spoon

The volume of a teaspoon is different in different measuring systems. Initially, one teaspoon was a quarter of a tablespoon, then one third. It is the latter volume that is now used in the American measurement system. This is approximately 4.93 milliliters. In American dietetics, the size of a teaspoon is 5 milliliters. In the UK, it is common practice to use 5.9 milliliters, but in some dietary manuals and cookbooks it is 5 milliliters. The volume of a teaspoon used in cooking is usually standardized in each country, but different sizes of spoons are used for food.

Tablespoon

The volume of a tablespoon also varies depending on the geographic region. So, for example, in America, one tablespoon is three teaspoons, half an ounce, approximately 14.7 milliliters, or 1/16 of a US cup. Tablespoons in the UK, Canada, Japan, South Africa and New Zealand also contain three teaspoons. So, a metric tablespoon is 15 milliliters. British tablespoon - 17.7 milliliters, if a teaspoon - 5.9, and 15 - if a teaspoon - 5 milliliters. Australian tablespoon - ⅔ oz., 4 teaspoons, or 20 milliliters.

Cup

As a measure of volume, cups are not defined as strictly as spoons. The cup volume can vary from 200 to 250 milliliters. The metric cup is 250 milliliters, and the American cup is slightly smaller, about 236.6 milliliters. In American dietetics, the volume of a cup is 240 milliliters. In Japan, the cups are even smaller - only 200 milliliters.

Quarts and gallons

Gallons and quarts also vary in size depending on the geographic region where they are used. In the imperial system of measurement, one gallon is equal to 4.55 liters, and in the American system of measures it is 3.79 liters. Mostly fuel is measured in gallons. A quart is equal to a quarter of a gallon and, accordingly, 1.1 liters in the American system, and approximately 1.14 liters in the imperial system.

Pint

Pints ​​are used to measure beer even in countries where the pint is not used to measure other liquids. In the UK, milk and cider are measured in pints. A pint is equal to one eighth of a gallon. Some other countries in the Commonwealth of Nations and Europe also use pints, but since they depend on the definition of a gallon, and a gallon has a different volume depending on the country, pints are also not the same everywhere. An imperial pint is approximately 568.2 milliliters, and an American pint is 473.2 milliliters.

Fluid ounce

An imperial ounce is roughly equal to 0.96 US ounces. Thus, an imperial ounce contains approximately 28.4 milliliters, and an American ounce contains 29.6 milliliters. One American ounce is also approximately equal to six teaspoons, two tablespoons, and one-eighth of a cup.

Volume calculation

Liquid displacement method

The volume of an object can be calculated using the liquid displacement method. To do this, it is immersed in a liquid of a known volume, a new volume is calculated or measured geometrically, and the difference between these two quantities is the volume of the object being measured. For example, if, when an object is lowered into a cup with one liter of water, the volume of the liquid increases to two liters, then the volume of the object is one liter. In this way, you can only calculate the volume of objects that do not absorb liquid.

Volume formulas

The volume of geometric shapes can be calculated using the following formulas:

Prism: product of the area of ​​the base of the prism by the height.

Rectangular parallelepiped: product of length, width and height.

Cube: rib length in the third degree.

Ellipsoid: product of semiaxes and 4 / 3π.

Pyramid: one third of the product of the area of ​​the base of the pyramid and the height.

Parallelepiped: product of length, width and height. If the height is unknown, it can be calculated using the edge and the angle it forms with the base. If we call the rib a, injection A, length - l, and the width is w, then the volume of the parallelepiped V is equal to:

V = l w a cos ( A)

This volume can also be calculated using the properties of right-angled triangles.

Cone: radius squared times height and ⅓π.

Ball: radius to the third power multiplied by 4 / 3π.

Cylinder: product of the area of ​​the base of the cylinder, height, and π: V = π r² h, where r is the radius of the cylinder and h is its height

The ratio between the volumes cylinder: ball: cone is 3: 2: 1.

Do you find it difficult to translate a unit of measurement from one language to another? Colleagues are ready to help you. Post a question to TCTerms and you will receive an answer within a few minutes.

How to convert cubes to liters? You will find out the answer to this question by reading this article.

Often, students have difficulty translating one unit of measurement into another. Hence, many questions like:

• 1 cubic meter - how many liters is it?
• How many liters are there in a cube of water?
• How many liters in a cube of gas, propane, gasoline, sand, earth, expanded clay?
• How many liters of methane and liquefied gas are in a cubic meter?
• How to convert cm cubed (cm 3) or dm cube (cm 3) to liters?
• How many liters is a cube of concrete, gasoline, diesel fuel, diesel fuel?

Further, we can single out a group of more specific questions, for example, how many liters are in a cube of water, and in a bath? Or how many cubes are in a barrel with a volume of 200 liters, and in a bucket, and in 10 liters? How many cubic meters is 40 liters of dry hydrogen? These questions are relevant both for students in solving various problems and for practical purposes, for example, when buying some kind of water tank. Let's understand this issue thoroughly, remember, so to speak, the materiel, so that at any time you can easily convert cubes to liters, and of course back.

Let us first of all pay attention to the fact that regardless of the substance placed in the container, the conversion from liters to cubes will always be the same, be it water, gas, sand or gasoline.

How many liters are in 1 cubic meter?

Let's start with a lyrical digression, namely, with a course in school physics. It is known that the generally accepted unit of measure for volume is the cubic meter. 1 cubic meter is the volume of a cube, the side of which is exactly one meter.

This unit is not always convenient and it is for this reason that others are very often used - liters - they are also cubic decimeters and cubic centimeters.

As practice has shown, the most convenient unit of measurement of volume turned out to be a liter, which is the volume of a cube, the length of which is 1 dm or 10 cm.Thus, we find that all questions how to convert a dm cube to cubes are equivalent to the question: how to convert liters to cubes, because 1 dm. cube = 1 liter.

The formula for converting the volume of a cube to liters

The formula for converting liters to cubic meters

Examples of converting liters to cubes

And now, armed with all the necessary knowledge, we can proceed directly to the calculations.

Examples: how to convert cubes to liters?

Let us now consider the inverse problems of finding the number of cubes in a specified number of liters.

For quick calculations, we suggest using our online calculators:

• cubes to liters conversion calculator

If you have any questions on this topic, or you need help in solving the problem of converting cubes to liters or liters to cubes, then leave them below in the comments.