Polyhydric alcohols - organic compounds, the molecules of which contain several hydroxyl groups (-OH), combined with a hydrocarbon radical

Glycols (diols)

• A syrupy, viscous colorless liquid, has an alcoholic smell, mixes well with water, greatly lowers the freezing point of water (60% solution freezes at -49 ˚С) - this is used in engine cooling systems - antifreezes.
• Ethylene glycol is toxic - a strong poison! It depresses the central nervous system and affects the kidneys.

Triols

• Colorless, viscous syrupy liquid, sweet in taste. Not poisonous. Without smell. Mixes well with water.
• Distributed in wildlife. Plays an important role in metabolic processes, as it is part of the fats (lipids) of animal and plant tissues.

Nomenclature

In the names of polyhydric alcohols ( polyols) the position and number of hydroxyl groups are indicated by the corresponding numbers and suffixes -diol(two OH groups), -triol(three OH groups), etc. For example:

Getting polyhydric alcohols

I... Obtaining dihydric alcohols

In industry

1. Catalytic hydration of ethylene oxide (production of ethylene glycol):

2. Interaction of dihalogenated alkanes with aqueous solutions of alkalis:

3. From synthesis gas:

2CO + 3H 2 250 °, 200 MPa, kat→ CH 2 (OH) -CH 2 (OH)

In the laboratory

1. Alkenes oxidation:

II... Obtaining trihydric alcohols (glycerin)

In industry

Saponification of fats (triglycerides):

Chemical properties of polyhydric alcohols

Acidic properties

1.With active metals:

HO-CH 2 -CH 2 -OH + 2Na → H 2 + NaO-CH 2 -CH 2 -ONa(sodium glycolate)

2.With copper hydroxide ( II ) - a quality response!

Simplified diagram

Basic properties

1.With hydrohalic acids

HO-CH 2 -CH 2 -OH + 2HCl H +↔ Cl-CH 2 -CH 2 -Cl + 2H 2 O

2. WITH nitrogen acid

T rhinitroglycerin - dynamite base

Application

• Ethylene glycol lavsan production , plastics, and for cooking antifreeze - aqueous solutions that freeze well below 0 ° C (using them to cool engines allows cars to work in winter); raw materials in organic synthesis.
• Glycerol widely used in leather and textile industry for finishing leather and fabrics and in other areas of the national economy. Sorbitol (hexahydric alcohol) is used as a sugar substitute for diabetics. Glycerin is widely used in cosmetics , Food Industry , pharmacology , production explosives ... Pure nitroglycerin explodes even with a weak impact; it serves as a raw material for obtaining smokeless powder and dynamite - an explosive that, unlike nitroglycerin, can be thrown safely. Dynamite was invented by Nobel, who founded the world famous Nobel Prize for outstanding scientific achievements in the fields of physics, chemistry, medicine and economics. Nitroglycerin is toxic, but in small quantities it serves as a medicine , as it expands the heart vessels and thereby improves the blood supply to the heart muscle.

Glycerin or, according to the international nomenclature, propantriol -1,2,3 is a complex substance that belongs to polyhydric alcohols, or rather is a trihydric alcohol, since has 3 hydroxyl groups - OH. The chemical properties of glycerin are similar to those of, however, they are more pronounced due to the fact that there are more hydroxyl groups and they affect each other.

Glycerin, like alcohols with one hydroxyl group, is highly soluble in water. This, one might say, is also a qualitative reaction to glycerin, since it dissolves in water in almost any ratio. This property is used in the production of antifreeze - liquids that do not freeze and cool the motors of cars and aircraft.

Also, glycerin interacts with potassium permanganate. This is a qualitative reaction to glycerin, which is also called Scheele volcano. To carry it out, it is necessary to add 1-2 drops of anhydrous glycerin to the potassium permanganate powder, which is poured in the form of a slide with a depression in a porcelain bowl. After a minute, the mixture ignites spontaneously. During the reaction, a large amount of heat is generated, and hot particles of the reaction products and water vapor are scattered. This reaction is redox.

Glycerin is hygroscopic, i.e. able to retain moisture. It is on this property that the following qualitative reaction to glycerin is based. It is carried out in a fume hood. To carry out it, pour about 1 cm3 of crystalline potassium hydrogen sulfate (KHSO4) into a clean, dry test tube. Add 1-2 drops of glycerin, then heating until a pungent odor appears. Potassium hydrogen sulfate acts here as a water-absorbing substance, which begins to manifest itself when heated. Glycerin, losing water, is converted into an unsaturated compound - acrolein, which has a pungent unpleasant odor. C3H5 (OH) 3 - H2C = CH-CHO + 2 H2O.

The reaction of glycerin with copper hydroxide is qualitative and serves to determine not only glycerin, but also others. In order to carry it out, it is initially necessary to prepare a fresh solution of copper (II) hydroxide. To do this, add to and obtain copper hydroxide (II), which forms a blue precipitate. Add a few drops of glycerin to this test tube with sediment and notice that the sediment disappeared, and the solution turned blue.

The resulting complex is called copper alcoholate or glycerate. A qualitative reaction for glycerin with copper (II) hydroxide is used if the glycerin is in pure form or in an aqueous solution. To carry out such reactions in which glycerin is present with impurities, it is necessary to pre-purify it from them.

Qualitative reactions for glycerin help detect it in any environment. It is actively used for the determination of glycerin in food, cosmetics, perfumes, medicines, and antifreezes.

2 drops of a solution of copper sulfate, 2 drops of sodium hydroxide solution are placed in a test tube and mixed - a blue gelatinous precipitate of copper (II) hydroxide is formed. Add 1 drop of glycerin to the test tube and shake the contents. The precipitate dissolves and a dark blue color appears due to the formation of copper glycerate.

Process chemistry:

Copper glycerate

Glycerin is a trihydric alcohol. Its acidity is greater than that of monohydric alcohols: an increase in the number of hydroxyl groups enhances the acidic character.

Glycerin easily forms glycerates with heavy metal hydroxides. However, its ability to form metal derivatives (glycerates) with multivalent metals is explained not so much by its increased acidity, but by the fact that in this case intracomplex compounds are formed, which are especially stable. Compounds of this kind are called chelated (from the Greek “hela” - claw).

The reaction with copper hydroxide is a qualitative reaction for polyhydric alcohols and allows them to be distinguished from monohydric alcohols.

Oxidation of ethyl alcohol with copper oxide

Place 2 drops of ethyl alcohol in a dry test tube. Holding a spiral of copper wire with tweezers, heat it in the flame of an alcohol lamp until a black coating of copper oxide appears. The still hot spiral is dipped into a test tube with ethyl alcohol. The black surface of the coil immediately turns golden due to the reduction of copper oxide. At the same time, there is a characteristic smell of acetaldehyde (the smell of apples).

The formation of acetaldehyde can be detected by a color reaction with sulphurous acid. To do this, place 3 drops of a solution of fuchsine sulfuric acid in a test tube and add 1 drop of the resulting solution with a pipette. A pink-violet color appears. Write the equation for the oxidation reaction of alcohol.

Oxidation of alcohols with a chromium mixture

Place 2 drops of ethyl alcohol in a dry test tube, add 1 drop of sulfuric acid solution and 2 drops of potassium dichromate solution. The orange solution is heated over the flame of an alcohol lamp until the color changes to bluish-green. At the same time, there is a characteristic smell of acetaldehyde.

Carry out a similar reaction using isoamyl alcohol or another available alcohol, noting the smell of the aldehyde formed.

Explain the chemistry of the process the chemistry of the process by writing the equations of the corresponding reactions .

Oxidation of ethyl alcohol with potassium permanganate solution

Place 2 drops of ethyl alcohol, 2 drops of potassium permanganate solution and 3 drops of sulfuric acid solution in a dry test tube. Carefully heat the contents of the tube over the flame of the burner, the pink solution becomes discolored. There is a characteristic odor of acetaldehyde, which can also be detected by a color reaction with fuchsin sulfuric acid.

Process chemistry : (write the reaction equation).

Alcohols are oxidized more easily than the corresponding saturated hydrocarbons, which is explained by the influence of the hydroxy group present in their molecule. Primary alcohols are converted by oxidation into aldehydes under mild conditions, and into acids under more severe conditions. Secondary alcohols give ketones upon oxidation.

When conducting the experiment, we use Micro laboratory for chemical experiment

The purpose of the experiment: study the qualitative reaction to glycerin.

Equipment: test tubes (2 pcs.).

Reagents: sodium hydroxide NaOH solution, copper (II) sulfate solution CuSO4, glycerin C3H5 (OH) 3.

1. Into two test tubes add 20-25 drops of copper (II) sulfate.

2. Add excess sodium hydroxide to it.

3. A blue precipitate of copper (II) hydroxide is formed.

4. Add glycerin dropwise to one test tube.

5. Shake the test tube until the sediment disappears and a dark blue solution of copper (II) glycerate is formed.

6. Compare the color of the solution with the color of copper (II) hydroxide in the control tube.

Output:
A qualitative reaction to glycerin is its interaction with copper (II) hydroxide.

An alcohol that bears little resemblance to alcohol.

Nitroglycerine are obtained by nitrating, treating with a mixture of concentrated acids (nitric and sulfuric, the latter is needed to bind the resulting water) of the simplest and most famous of the triatomic alcohols - glycerin C3H5 (OH) 3. The production of explosives and gunpowders is one of the main consumers of glycerin, although, of course is far from the only one.

Nowadays, quite a lot of glycerin is used for the production of polymeric materials. Glyphthalic resins - the reaction products of glycerin with phthalic acid, when dissolved in alcohol, turn into a good, albeit somewhat fragile, electrical insulating varnish. Glycerin is also needed to make the much more popular epoxy resins. Epichlorohydrin is obtained from glycerin - a substance that is indispensable in the synthesis of the famous "epoxy". But not because of these resins, and even more so not because of nitroglycerin, glycerin is considered a vital substance for us.
It is sold in pharmacies. But in medical practice, pure glycerin is used very limitedly. It softens the skin well. In this capacity - a leather softener - we mainly use it at home, in everyday life. He plays the same role in the shoe and leather industries. Sometimes glycerin is added to the composition of medicinal suppositories (at the appropriate dosage, it acts as a laxative). This, in fact, limits the medicinal functions of glycerin. Derivatives of glycerin are used much more widely in medical practice, primarily nitroglycerin and glycerophosphates.

Glycerophosphate, which is sold in the pharmacy, actually contains two glycerophosphates. The composition of this medication, which is prescribed for adults with general overwork and exhaustion of the nervous system, and for children with rickets, contains 10% calcium glycerophosphate, 2% sodium glycerophosphate and 88% ordinary sugar.

The essential amino acid methionine is synthesized from glycerin. In medical practice, methionine is used for liver diseases and atherosclerosis.

Glycerin derivatives are always present in the organisms of higher animals and humans. These are fats - esters of glycerin and organic acids (palmitic, stearic and oleic) - the most energy-intensive (although not always useful) substances in the body. It is estimated that the energy value of fats is more than twice that of carbohydrates. It is no coincidence that the body stores this very high-calorie "fuel" in reserve. And besides, the fatty layer also serves as thermal insulation: the thermal conductivity of fats is extremely low. In plants, fats are mainly contained in the seeds. This is one of the manifestations of the eternal wisdom of nature: thereby she took care of the energy supply of the next generations ...

For the first time on our planet, glycerin was obtained in 1779. Karl Wilhelm Scheele (1742-1786) boiled olive oil with lead litharge (lead oxide) and obtained a sweetish syrupy liquid. He called it sweet butter or the sweet beginning of fats. Scheele, of course, could not determine exactly the composition and structure of this "beginning": organic chemistry was just beginning to develop. The composition of glycerin was found out in 1823 by the French chemist Michel Eugene Chevreul, who was studying fats of animal origin. And the fact that glycerin is a trihydric alcohol was first established by the famous French chemist Charles Adolphe Würz. By the way, he was the first to synthesize in 1857 the simplest dihydric alcohol ethylene glycol.
Synthetic glycerin from oil (more precisely, from propylene) was first obtained in 1938.

Glycerin is partly similar to the most, perhaps, popular of the alcohols - wine, or ethyl. As well wine alcohol: it burns with a blue dim flame. Like wine alcohol, it actively absorbs moisture from the air. As in the formation of alcohol-water solutions, when mixing glycerol and water, the total volume turns out to be less than the volume of the initial components. Like ethyl alcohol, glycerin is needed to make gunpowder. But if in this production the role of C2H5OH, in general, is auxiliary, then glycerin is an irreplaceable raw material for obtaining nitroglycerin. So, ballistic powder and dynamite too. Finally, like wine alcohol, glycerin is included in alcoholic beverages.

True, contrary to popular belief, there is no glycerin in the composition of liqueurs. The liqueurs are thickened with sugar syrup. But in natural wines, glycerin is always present. Such wines are served in expensive establishments like http://www.tatarcha.net/ and who would have thought that once they wanted to get such cheap glycerin from them.

Glycerin is formed during the hydrolysis of fats, when, at high pressure (25 105 Pascals) and temperatures slightly above 200 ° C, water breaks down fats. But only a few people know that the same glycerin is a normal product of the fermentation of sugars. About three percent of the sugar in grapes is eventually converted to glycerin. In wine, however, there is much less glycerin: in the process of wine maturation, it partially turns into other organic substances, but fractions of a percent of glycerin is present in all natural wines, and in some wines it was introduced and is introduced deliberately, for example, when making good port using classical technology.
At the end of the last century, when the demand for glycerin increased in all industrialized countries, chemists quite seriously discussed the possibility of extracting glycerin from distillery waste, specifically from stillage. Nowadays, the need for glycerin is even greater: but still it is not extracted from vinasse. Now glycerin is obtained mainly synthetically - from propylene, although the classic method of producing glycerin - by hydrolysis of fats - has not lost its significance either.

If pure glycerin is cooled very slowly, it solidifies at about 18 ° C. But this peculiar liquid is much easier to supercool than to turn into crystals. It can remain liquid even at temperatures below 0 ° C. Its aqueous solutions behave in the same way. For example, a solution in which there is one part of water for two parts by weight of glycerin freezes at minus 46.5 ° C.

In addition, glycerin is a moderately viscous liquid, almost non-toxic, well dissolving many organic and inorganic substances. Because of this complex of properties, glycerol has recently found very unexpected applications.
Here we will allow ourselves a small lyrical digression.

Mayakovsky has the following lines in the concluding part of the poem "About It":

Here it is,
large-faced
quiet chemist,
his forehead wrinkled before the experiment.
Book - "All the Earth" -
seeks out the name.
Twentieth century.
Who can resurrect?

Let's interrupt the quote and turn to sad prose.

In 1967, the famous American psychologist Professor James Bedford died of leukemia. According to the will of the deceased, immediately after the onset of clinical death, his body was frozen... Bedford hoped that ultra-low temperatures would stop the process of cell decay and keep them unchanged until science finds a way to combat an incurable disease. Then the body will be thawed and they will try to bring the scientist back to life ...
It is unlikely that these hopes can be considered justified. The largest specialist in the field of resuscitation, Academician of the Academy of Medical Sciences V.A.Negovsky, wrote that by cooling the body to a temperature below + 10 ° C, it is possible to extend the still reversible state of clinical death to 40-60 minutes. The use of subzero temperatures when freezing living tissues and cells leads to their death.

Nevertheless, hopes for a resurrection in the future attract many. These hopes are nourished by the belief in the omnipotence of the science of the future. To some extent, this belief is supported by some properties of glycerin and blood substitutes prepared on its basis.

Qualitative reaction to glycerin

In the United States, more than a thousand people have undergone the freezing procedure in the hope of revitalization and recovery in the future. In the town of Farmingdale in 1971, a "clinic for the dead" began to function. Immediately after death, all blood is released from the patient's body at this clinic and the veins are filled with a special glycerin solution. After that, the body is wrapped in staniol and placed in a vessel with dry ice (- 79 ° C), and then in a special sealed capsule with liquid nitrogen. “If nitrogen is changed in a timely manner, the body will never decompose,” said the head of the clinic, K. Henderson.

But this is not enough! Then people did not agree to posthumous freezing so that their corpses would be well preserved.
Glycerin actually makes it difficult for ice crystals to form, which destroy blood vessels and cells. Once it has already been possible to revive the heart of a chicken embryo cooled in glycerin to almost absolute zero. But they have not even tried to do something similar with the whole organism. To get a person out of the state of clinical death years after its onset is also the same. Therefore, we will once again quote Vladimir Aleksandrovich Negovsky:

“I know,” he said, “there is only one such case with a happy ending - this is the case with the sleeping beauty. A kiss awakened her from a century's sleep. This is also a way of resuscitation, and besides, it is also a pleasant one. "

But glycerin - let's add on our own - has nothing to do with it.

Trihydric alcohols (glycerin).

Triatomic alcohols contain three hydroxyl groups at different carbon atoms.

General formula CnH2n - 1 (OH) 3.

The first and main representative of trihydric alcohols is glycerin (propanetriol-1,2,3) HOCH2-CHOH-CH2OH.

Nomenclature. To name triatomic alcohols according to the systematic nomenclature, it is necessary to add the suffix -triol to the name of the corresponding alkane.

The isomerism of trihydric alcohols, as well as diatomic alcohols, is determined by the structure of the carbon chain and the position of three hydroxyl groups in it.

Receiving. 1. Glycerin can be obtained by hydrolysis (saponification) of vegetable or animal fats (in the presence of alkalis or acids):

H2C-O-C // - C17H35 H2C-OH

HC-O-C // - C17H35 + 3H2O ® HC-OH + 3C17H35COOH

H2C-O-C // - C17H35 H2C-OH

triglyceride (fat) glycerin stearic

Hydrolysis in the presence of alkalis leads to the formation of sodium or potassium salts of higher acids - soap (therefore this process is called saponification).

2. Synthesis from propylene (industrial method):

| Cl2, 450-500 oC | H2O (hydrolysis)

CH ---- ® CH ---- ®

propylene chloride

CH2OH HOCl (hypo CH2OH CH2OH

| chlorination) | H2O (hydrolysis) |

®CH ---- ® CHOH ---- ® CHOH

|| -HCl | -HCl |

allyl monochloro-glycerin

hydrin alcohol

glycerin

Chemical properties. In terms of chemical properties, glycerin is in many ways similar to ethylene glycol. It can react with one, two or three hydroxyl groups.

1. Formation of glycerates.

Glycerin, reacting with alkali metals, as well as with heavy metal hydroxides, forms glycerates:

H2С-OH H2C-Oæ / O- CH2

2 HC-OH + Cu (OH) 2 ® HC-O / ãO- CH + 2H2O

H2C-OH H2C-OH HO-CH2

copper glycerate

2. Formation of esters. With organic and mineral acids, glycerin forms esters:

H2C-OH HO-NO2 H2C-O-NO2

HC-OH + HO-NO2 -® HC-O-NO2 + 3H2O

H2C-OH HO-NO2 H2C-O-NO2

glycerin nitric trinitrate

glycerin acid

(nitroglycerine)

H2C-OH HO-OC-CH3 H2C-O-COCH3

HC-OH + HO-OC-CH3 -® HC-O-COCH3 + 3H2O

H2C-OH HO-OC-CH3 H2C-O-COCH3

glycerin acetic triacetate

glycerin acid

3. Replacement of hydroxyl groups with halogens. When glycerol interacts with hydrogen halides (HC1, HBr), mono- and dichloro- or bromohydrins are formed:

H2C-OH ® HC-OH ® HC-Cl ù CH2 \

| HCl | | HCl | | | KOH | O

HC-OH - | H2C-OH - | H2C-OH | --- ® CH /

| -H2O | -H2O | | -KCl, -H2O |

H2C-OH ® H2C-OH ® H2C-Cl û CH2Cl

monochloro-dichloro-epichloro-

hydrins hydrines hydrin

4. Oxidation. During the oxidation of glycerin, various products are formed, the composition of which depends on the nature of the oxidizing agent. The initial oxidation products are: glyceric aldehyde HOCH2-CHOH-CHO, dihydroxyacetone HOCH2-CO-CH2OH and the final product (without breaking the carbon chain) - oxalic acid HOOC-COOH.

Individual representatives. Glycerin (propanetriol-1,2,3) HOCH2-CHOH-CH2OH is a viscous hygroscopic non-toxic liquid (bp 290 ° C with decomp.), Sweet in taste. Miscible with water in all proportions. Used for the production of explosives, antifreeze and polyester polymers. It is used in food (for the manufacture of confectionery, liqueurs, etc.), textile, leather and chemical industries, in perfumery.

Previous891011121314151617181920212223Next

Home / Glycerin

Glycerol

Quality standard

GOST 6824-96

Formula

Description

Viscous liquid, colorless and odorless, sweet in taste. Because of its sweet taste, the substance got its name (lat.> Glycos [glycos] - sweet). Mixes up with water in any ratio. Not poisonous. The melting point of glycerin is 8 ° C, the boiling point is 245 ° C. The density of glycerin is 1.26 g / cm3.

The chemical properties of glycerin are typical of polyhydric alcohols. Of organic compounds, it is readily soluble in alcohol, but insoluble in fats, arenes, ether and chloroform. Glycerin itself dissolves well mono- and disaccharides, as well as inorganic salts and alkalis. Hence the wide range of uses for glycerin. In 1938, a method was developed for the synthesis of glycerin from propylene. A significant portion of the glycerin is produced in this way.

Application

The area of ​​application of glycerin is diverse: food industry, tobacco production, medical industry, production of detergents and cosmetics, agriculture, textile, paper and leather industries, plastics production, paint and varnish industry, electrical and radio engineering.

Glycerin is used as a food additive E422 in the production of confectionery products to improve consistency, to prevent sagging of chocolate, to increase the volume of bread.

The addition of glycerin reduces the time it takes to harden the bread, makes the pasta less sticky, and reduces the sticking of starch during baking.

Glycerin is used in the manufacture of extracts of coffee, tea, ginger and other plant substances, which are finely ground and treated with an aqueous solution of glycerin, heated and evaporated. An extract is obtained, which contains about 30% glycerin. Glycerin is widely used in the production of soft drinks. The extract prepared on the basis of glycerin, in a diluted state, gives the drinks "softness".

Due to its high hygroscopicity, glycerin is used in the preparation of tobacco (to keep the leaves moist and eliminate the unpleasant taste).

In medicine and in the production of pharmaceuticals, glycerin is used to dissolve drugs, increase the viscosity of liquid preparations, prevent changes during fermentation of liquids, and prevent ointments, pastes and creams from drying out. By using glycerin instead of water, highly concentrated medicinal solutions can be prepared. It also dissolves iodine, bromine, phenol, thymol, mercury chloride and alkaloids well. Glycerin has antiseptic properties.

Glycerin enhances the cleaning power of most toilet soaps in which it is used, making the skin look whiter and softer.

In agriculture, glycerin is used to treat seeds, which contributes to their good germination, trees and shrubs, which protects the bark from bad weather.

Glycerin in the textile industry is used in weaving, spinning, dyeing, which makes fabrics soft and elastic. It is used to produce aniline dyes, paint solvents, and in the production of synthetic silk and wool.

In the paper industry, glycerin is used in the production of tissue paper, parchment, tracing paper, paper napkins and heat-resistant paper.

In the leather industry, glycerine solutions are used in the process of fattening leather, adding it to aqueous solutions of barium chloride. Glycerin is part of wax emulsions for leather tanning.

Glycerin is widely used in the production of transparent packaging materials.

QUALITATIVE RESPONSE TO GLYCERINE

Due to its plasticity, the property of retaining moisture and resistant to cold, glycerin is used as a plasticizer in the production of cellophane. Glycerin is an integral part in the production of plastics and resins. Polyglycerols are used to coat paper bags that hold oil. Paper packaging material becomes fire-resistant if it is impregnated with an aqueous solution of glycerin, borax, ammonium phosphate, gelatin under pressure.

In the paint and varnish industry, glycerin is a component of polishing compounds, especially varnishes used for finishing.

In radio engineering, glycerin is widely used in the production of electrolytic capacitors, alkyd resins, which are used as an insulating material, in the processing of aluminum and its alloys.

Medicinal properties and indications for the use of glycerin

Glycerin in 10-30% mixture with water, ethyl alcohol, lanolin, petroleum jelly has the ability to soften tissues and is usually used as an emollient for the skin and mucous membranes.

Glycerin is used as a base for ointments and as a solvent for a number of medicinal substances (borax, tannin, ichthyol, etc.).

On the basis of glycerin, other fat-free skin care products are also prepared - creams (glycerolate creams), jellies (fat-free ointments) and other dosage forms and cosmetic preparations, for example, 3-5% glycerin is added to lotions to soften the skin).

In a mixture with ammonia and alcohol (ammonia - 20.0, glycerin - 40.0, ethyl alcohol 70% - 40.0), glycerin is used as a means to soften the skin of the hands (for wiping hands with dry skin).

Package

From 1 and 2.5 liter polyethylene bottles for research and laboratory applications, 25 and 190 liter plastic drums, up to 1000 liter containers.

Transportation

They are transported in aluminum or steel railway tanks and barrels.

Storage

Store glycerin in sealed aluminum or stainless steel containers under a nitrogen blanket

in a ventilated dry room at a low temperature.

The shelf life of glycerin is 5 years from the date of manufacture.

Specifications

- Molar mass - 92.1 g / mol

- Density - 1.261 g / cm3

- Thermal properties

- Melting point - 18 ° C

- Evaporating temperature - 290 ° C

- Optical refractive index - 1.4729

CAS number - 56-81-5

- SMILES - OCC (O) CO

Shipment from 1 kg! Delivery across the Russian Federation! We work only with legal entities (including individual entrepreneurs) and only by bank transfer!